Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the Magura lever or caliper. Olive is made from soft metal, so...
Original spare parts for Magura MT disc brakes and also Magura hydraulic rim brakes HS11, HS22, HS33. Barbed fittings, sleve nuts, olives and all other spare parst to connect the hose with lever or caliper.
There are 11 products.
Sleeve nut for rim brake calipers of Magura HS11, HS22, HS33 and also RT6 and RT8. Sleeve nut nut hose tightening in the caliper. Sleeve nut will help you with tightening of olive on the hose and seal the whole braking system. Sleeve nut is made for all models of hydraulic rim brakes Magura.
Sleeve nut Magura for hydraulic rim brakes Magura HS11, HS22 and HS33 and also complete Magura MT series made from Carbotecture® material. Sleeve nuts keeps the hose with olive inside the lever and press the olive inside. Sleeve nut M9 is made from durable steel and it is possible to use it repeatedly during the hose shortening or complete change.
Original barbed fitting with m6 screw for Magura hose. This barbed fitting is used with all brakes which uses plastic hose like rim brakes Magura HS11, HS22, HS33, HS33 R, or MT2. Barbed fitting should be pressed in the hose with special tool or inside vise with proper adapters and hammer.
Spare original MAGURA bolt in EBT bleed port for disc brake calipers MAGURA MT (all models 2015 / 2017 / 2019 / 2-piston / 4-piston). Small bolt is made from steel and keeps the fluid inside the braking system. BE AWARE! Tightening torque of this bleed port bolt is max. 4Nm, or you can damage it!
Bleeding and filling bolt / barbed fitting MAGURA for all disc brakes Magura MT and Magura HS rim brakes. Bolt have a shorter thread M6 and it is supplied with 2x o-ring which better seals the system when connected to caliper. O-ring is possible to put on the bolt thread side. We recoomend to use transparent bleeding hose. Bolt is supplied as 1pc (1pc of...
MAGURA MT and HS hose tube connection adapter with which you can have hose from brake lever assembly closer to the handlebars. Thanks to 45° adapter you can have your hose almost parallel with your handlebars, so hoses are more safe during fall or crash. Adapter is compactible with disc brakes MAGURA MT from year 2015 (and never models) and also with...