Distancing spacer with 0,2mm hight for a centering of a brake caliper or differenc components. Can be used on many types of calipers with IS or PM mount. You can get most from the braking force if you pads contact the whole rotor surface. Spacer is made from steel and inner diameter is in size for M6 bolts.
Disc brake spares
If you need repair your disc brake and not to buy another one - new one, you can choos from our offer of spare parts. We have wide offer of spare parts for HOPE brakes, Magura brakes and others which are mostly used on trials bikes. Slave cylinders, hoses, sealings, bolts, brake levers etc.
There are 51 products.
Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the Magura lever or caliper. Olive is made from soft metal, so...
Náhradní díl k ráfkovým hydraulickým brzdám Magura HS33 nebo kotoučovým brzdám typu Magura MT. Krytka hadičky brzdové páky, která zabraňuje jejímu přeražení u šroubení hadičky. Krytka se na šroubení nasouvá a pevně jej obepne.
Sleeve nut Magura for hydraulic rim brakes Magura HS11, HS22 and HS33 and also complete Magura MT series made from Carbotecture® material. Sleeve nuts keeps the hose with olive inside the lever and press the olive inside. Sleeve nut M9 is made from durable steel and it is possible to use it repeatedly during the hose shortening or complete change.
Original barbed fitting with m6 screw for Magura hose. This barbed fitting is used with all brakes which uses plastic hose like rim brakes Magura HS11, HS22, HS33, HS33 R, or MT2. Barbed fitting should be pressed in the hose with special tool or inside vise with proper adapters and hammer.
Spare original MAGURA bolt in EBT bleed port for disc brake calipers MAGURA MT (all models 2015 / 2017 / 2019 / 2-piston / 4-piston). Small bolt is made from steel and keeps the fluid inside the braking system. BE AWARE! Tightening torque of this bleed port bolt is max. 4Nm, or you can damage it!